Tlhaloso ea Lihlahisoa
CRP-RH26-165 165kg Heavy Duty Spot Welding Robot e etselitsoe-mehala ea ho hlahisa litšepe tse ngata. Bophahamo ba eona ba boima ba 165kg bo kopanngoe le bolelele ba 2.6m-bo tiileng ba letsoho bo tiisang hore lisebelisoa tse boima tsa mosebetsi li tsitsitse ebile li sebetsa hantle. E na le-mohaho o thibelang{9}mokhoa oa ho thibela litšitiso le lipotoloho tse kopaneng tsa metsi le khase.
Likarolo tse sebetsang
● 165kg Moroalo o boima oa ho lefa
Sebopeho se thata haholo le moralo o matlafalitsoeng oa mojaro o netefatsa ho sisinyeha ha zero ha o bona lisebelisoa tse boima tsa mosebetsi.
● Hollow Arm & Ahiloeng-ka Lithapo
Letsoho le lithapo tse hahiloeng-ka hare li felisa tšitiso ea lisebelisoa.
● Setlholi sa EMC/EMI Triple{0}Phase
E ahiloeng-ka mekhahlelo e meraro{1}}e thibela ho kena-kenana le motlakase nakong ea welding.
● E kopantsoe φ12 Khase + φ19.5 Litsela tsa Metsi
Litsela tse kopantsoeng tse peli tsa khase / metsi li kopana ka kotloloho le pholileng ea welding le ho sireletsa litlhoko tsa khase.
● Ho Welding{{0}Speed Precision Welding' e Phahameng
Taolo ea servo e thibelang-ho thothomela le ho ntlafatsa nako ea lithunya tse chesellang li khutsufatsa haholo linako tsa nako ea li-welding.
● Compact Multi{0}}Robot Deployment
'Mele o monyane le lithapo tse hokahaneng li tšehetsa-mehatla ea tlhahiso ea melapo e phahameng.
● Rapid Welding Setup
Sehokelo{{0}se bonolo sa mosebelisi le moralo oa modular li ntlafatsa ho lokisa liphoso le ho lokisoa hantle ka ho feta 30%.
Likarolo tsa Botekgeniki tsa Robot 'Mele
|
Mohlala |
CRP-RH26-165 |
|
|
Sebopeho sa letsoho |
Manonyeletso a mangata a emeng |
|
|
Boemo ba tokoloho |
6 akse |
|
|
Boholo ba moputso |
165kg |
|
|
Boholo ba moputso |
165kg |
|
|
Boholo ba maeto |
Axis 1 |
-175 likhato ~ 175 likhato |
|
Axis 2 |
-76 likhato ~ 64 likhato |
|
|
Axis 3 |
-74 likhato ~ 100 likhato |
|
|
Axis 4 |
-200 likhato ~ 200 likhato |
|
|
Axis 5 |
-125 likhato ~ 125 likhato |
|
|
Axis 6 |
-360 likhato ~ 360 likhato |
|
|
Lebelo le phahameng |
Axis 1 |
130 likhato /S |
|
Axis 2 |
110℃/S |
|
|
Axis 3 |
130 likhato /S |
|
|
Axis 4 |
175℃/S |
|
|
Axis 5 |
170 likhato /S |
|
|
Axis 6 |
280 likhato /S |
|
|
Torque e lumelletsoeng |
Axis 4 |
960N.m |
|
Axis 5 |
960N.m |
|
|
Axis 6 |
500N.m |
|
|
Nako e lumelletsoeng ea inertia |
Axis 4 |
100kg.m² |
|
Axis 5 |
100kg.m² |
|
|
Axis 6 |
50kg.m² |
|
|
Ho nepahala ha maemo a phetoang |
± 0.06 limilimithara |
|
|
Boholo ba sebaka sa ho fihla |
2606 limilimithara |
|
|
Boima ba 'mele oa roboto |
1270kg |
|
|
Mokhoa oa ho kenya |
Fatše |
|
|
Boemo ba lerata |
80dB(A) |
|
|
Sehokelo sa mmele |
E bolokiloe IO |
26Pin |
|
Khase e bolokiloeng |
2 * φ12mm |
|
|
Tikoloho ea ho kenya |
Mocheso oa tikoloho |
0-45 likhato |
|
Mongobo o amanang |
35%-85%RH (ha ho condensation) |
|
|
Ho thothomela |
Ka tlase ho 0.5G |
|
|
Ba bang |
Ho kenya liroboto ho tlameha ho ba hole le: lino tse tukang kapa tse senyang kapa likhase, mehloli ea motlakase ea tšitiso. |
|
|
Boemo ba IP |
'Mele IP54, Wrist IP67 |
|
|
Likarolo tsa melemo |
Sebopeho sa Compact, lebelo le phahameng, ho nepahala ho phahameng, ho tiea ho phahameng, bophelo bo phahameng, katoloso e phahameng le ts'ebetso e bonolo |
|
|
Kopo |
Ho tšoara, ho cheselletsa letheba, ho itšeha, ho kopanya, ho tšoaea, ho sila |
|
|
Phetoho ea khabinete ea motlakase |
G15A |
|
*Maemo a tekanyo
(1) Roboto e tsitsitse ka thata sebakeng se bataletseng;
(2) Teko ho 3700mm hole le bohareng ba ho potoloha ha JT1 e kopaneng; boemo ba lerata bo fetoha ho ya ka maemo, lerata la bokamorao le na le kgahlamelo e itseng
Sets'oants'o sa Interface ea ho kenya
Setšoantšo sa Range Range
LBH
P: Na moroalo oa 165kg o ka sebetsana le welding e boima, joalo ka ea chassis ea likoloi?
K: E etselitsoe ka ho khetheha bakeng sa ho tjheseletsa-haholo-holo, letsoho le{1}}le thata le ka ts'ehetsa lithunya tse kholo le lisebelisoa tsa ho sebetsa, e leng ho etsang hore e tšoanelehe bakeng sa ho cheselletsa likoloi le likarolo tsa mochini oa kaho.
P: Potso e entsoeng-ea moea le metsing e nolofatsa litsela tsa tlhahiso joang?
A: Li-circuits tsa moea tse peli tsa bophara ba 12mm (bakeng sa khase e sireletsang toche le koloi ea motlakase) le li-circuits tse peli tsa metsi tse bophara ba 19.5mm (bakeng sa ho pholisa lebone): Sena se felisa 90% ea liphaephe tse ka ntle le ho felisa kotsi ea ho tšoasoa le ho lutla.
P: Tšitiso ea motlakase e sebetsoa joang ha liroboto tse ngata li sebetsa 'moho?
A: E hahiloe-ka har'a indasteri-sehlopha sa boraro{2}}mohato oa boraro{2}}: EMC/EMI e netefalitsoe; tšitiso ea matšoao ho tsoa ho liroboto tse haufi e fokotsehile ka 70% *.
P: Ntlafatso ea ts'ebetso e kae ha e bapisoa le mechini ea khale ea tjheseletsa?
A: Litheknoloji tse tharo tse kholo tsa ho potlakisa:
-enjene ea lebelo le holimo (nako ea karabelo ea 0.02s)
Torch path optimization algorithm
Phokotso ea vibration e fokotsa nako ea ho beha maemo
Kakaretso ea nako ea potoloho e fokotsoa ke Ho feta kapa ho lekana le 15%
Hot Tags: Roboto ea 165kg, China 165kg bahlahisi ba liroboto tse tjheseletsang thepa, barekisi, feme
