Tlhaloso ea Lihlahisoa
CRP-RP18-25 Mechanical Robot Arm e hlalosa botjha botshepehi ba ho sebetsana le thepa ya intaseteri ka meralo ya yona ya sepakapakeng{7}}le moetso o thata wa 4-ea axis. Roboto ena e entsoe bakeng sa ts'ebetso e tsoelang pele ea 24/7 tikolohong e boima ea tlhahiso, e fana ka tiisetso ea-ea potoloho ea tšohanyetso ea ho emisa le ts'ireletso e lekantsoeng ea IP67 - e leng se etsang hore e be eona tharollo e nepahetseng bakeng sa phetisetso ea likarolo tsa koloi, ts'ebetso ea ho qala, le ho sebetsana le thepa ea meriana moo ho sa khoneheng ho sebetsa ka mokhoa o sireletsehileng.
Likarolo tse sebetsang
● Dual-Circuit Emergency Stop System
Boto e ikemetseng ea "relay" + "backup control board" e fana ka ho emisa ho sa hlokahaleng ha tšohanyetso (EN ISO 13849-1 PL e), ho felisa likotsi tsa ho se atlehe ha ntlha e le 'ngoe.
● Indasteri{{0}Kereiti ea Ho itšireletsa Lerata
Sefe e hahiloeng-ka mekhahlelo e meraro-e hatella 98% ea tšitiso ea EMI/RFI (e lekoa ho latela IEC 61000-4) bakeng sa ts'ebetso e tsitsitseng haufi le lisebelisoa tsa li-welding/transformer.
● High-Flex Specialized Cabling
Lithapo tse kenyelitsoeng tse limilione tse 10+ (tse Fetang ISO 18601) li thibela ho khathala ha terata ka har'a-mesebetsi ea ho tšoara khafetsa.
● Kopanyo e Kopanetsoeng-ea Circuit Pneumatic
Litsela tsa khase tse sa hlokeng letho li thusa ka nako e le 'ngoe ho tšoara vacuum + ho hloekisa moea - ho bohlokoa bakeng sa likhoele tsa tlhahiso ea likoloi / tsa elektroniki.
● Harmonic Drive 4-Axis Rigidity
25-mofuta oa li-harmonic tse fokotsang li fana ka tsela e nepahetseng ea ±0.05mm tlas'a meroalo ea 25kg (tekanyo ea torque e etellang pele indastering ho latela ISO 9409).
● IP67 e Tiisitsoeng Theknoloji e Kopanetsoeng
Corrosion-manonyeletso a manganga a rod a nang le li-triple-lip seal tse mamellang lerōle le silang/ho pepesehela mocheso (E netefalitsoe ho latela IEC 60529).
Likarolo tsa Botekgeniki tsa Robot 'Mele
|
Mohlala |
CRP{{0}RP18-25 |
|
|
Sebopeho sa letsoho |
Manonyeletso a mangata + molamu o kopanyang |
|
|
Boemo ba tokoloho |
4 akse |
|
|
Boholo ba moputso |
25kg |
|
|
Boholo ba maeto |
Axis 1 |
-170 likhato ~ 170 likhato |
|
Axis 2 |
-90 likhato ~ 45 likhato |
|
|
Axis 3 |
-75 likhato ~ 105 likhato |
|
|
Axis 4 |
-360 likhato ~ 360 likhato |
|
|
Lebelo le phahameng |
Axis 1 |
172℃/S |
|
Axis 2 |
172℃/S |
|
|
Axis 3 |
212℃/S |
|
|
Axis 4 |
350 likhato /S |
|
|
Torque e lumelletsoeng |
Axis 4 |
1.5kg.m² |
|
Ho nepahala ha maemo a phetoang |
± 0.08mm |
|
|
Boholo ba sebaka sa ho fihla |
1885 limilimithara |
|
|
Boima ba 'mele oa roboto |
245kg |
|
|
Mokhoa oa ho kenya |
Fatše |
|
|
Sehokelo sa mmele |
E bolokiloe IO |
16Pin |
|
Khase e bolokiloeng |
2 * φ8mm |
|
|
Tikoloho ea ho kenya |
Mocheso oa tikoloho |
0-45 likhato |
|
Mongobo o amanang |
20% -80%RH (ha ho condensation) |
|
|
Ho thothomela |
Ka tlase ho 0.5G |
|
|
Ba bang |
Ho kenya liroboto ho tlameha ho ba hole le: lino tse tukang kapa tse senyang kapa likhase, mehloli ea motlakase ea tšitiso. |
|
|
Boemo ba IP |
IP56 |
|
|
Likarolo tsa melemo |
Sebopeho sa Compact, lebelo le phahameng, ho nepahala ho phahameng, ho tiea ho phahameng, bophelo bo phahameng, katoloso e phahameng le ts'ebetso e bonolo |
|
|
Kopo |
Ho ts'oara, ho palamisa, ho tlosa palletizing, ho kenya le ho laolla |
|
|
Tlhophiso ea khabinete ea motlakase |
G12A/G12B |
|
Setšoantšo sa Interface ea ho kenya
Setšoantšo sa Motion Range
LBH
P: CRP-RP18-25 e netefatsa joang ho tšepahala ho emisa ha maemo a tšohanyetso libakeng tse kotsi haholo?
A: The CRP-RP18-25 Mechanical Robot Arm e sebelisa-mochine oa ho emisa boemo ba tšohanyetso o habeli o nang le boto e ikemetseng ea relay le bekapo (e tiisitsoeng ho EN ISO 13849-1 PL e), e felisang likotsi tsa ho se atlehe ha ntlha e le 'ngoe nakong ea ts'ebetso ea ts'ebetso.
P: Na letsoho lee la roboto le ka sebetsa haufi le thepa ea ho cheselletsa ntle le tšitiso?
K: Ee, sefe e hahelletsoeng-ka mekhahlelo e meraro{1}}e hatella 98% ea litšitiso tsa EMI/RFI (e lekiloeng ho latela IEC 61000-4), e netefatsa hore ts'ebetso e tsitsitse ha e kopantsoe le liroboto tsa li-welding kapa li-transformer tsa motlakase.
P: Ke eng e etsang hore CRP-RP18-25 e loketse tikoloho e metsi/e lerōle?
K: IP67-manonyeletso a rod a hlophisitsoeng (a tiisitsoe ho latela IEC 60529) a na le li-lip seal tse tharo-le lintja tse sa jeng, tse fanang ka tšireletso e tiisitsoeng khahlanong le pholiso, lerōle le silang, le mekhoa ea ho hlatsoa.
P: Hobaneng letsoho lee la roboto le sebelisa liphaephe tse habeli- tsa khase?
K: Phaephe e 'meli-e etsa hore moea o tšoare ka nako e le 'ngoe le ho tima moea o hatelitsoeng{1} - ho bohlokoa haholo bakeng sa ho sebetsana le likoloi/matla a elektroniki moo ho hloekisoang le ho ts'oara ho etsahalang saekeleng e le 'ngoe.
P: Mofuta oa 25 oa mofuta oa harmonic o ntlafatsa ho sebetsana ka nepo joang?
A: The 4-axis harmonic reducer e fana ka ± 0.05mm pheta-pheta (ka ISO 9283) tlas'a meroalo e felletseng ea 25kg, e thibela ho kheloha ho bakoang ke ho lefa lits'ebetsong tse boima tsa phetisetso.
P: Ke molemo ofe oa tlhokomelo o fanang ka-flex cabling e phahameng?
K: Mohala o khethehileng o tenyetsehang haholo o feta limilione tse 10 (e lumellana le ISO 18601), o fokotsa nako ea ho se be le mokhathala ka -ho khetha khafetsa{3}}le{4}}mesebetsi ea sebaka.
P: Na CRP-RP18-25 e tsamaisana le lisebelisoa tse teng tsa moea?
K: E, peipi ea eona e habeli-e tšehetsa lisebelisoa tse tloaelehileng tsa moea tsa indasteri tsa 0.6-0.8MPa 'me e kenyelletsa lisebelisoa tsa bokahohleng tsa NPT/ISO bakeng sa khokahanyo e se nang moeli.
Hot Tags: letsoho la liroboto tsa mochini, China baetsi ba matsoho ba liroboto ba mochini, barekisi, feme
